Signify smart lighting, sized and fitted for your India site.
How a Pune office cut its lighting bill the first full month after we swapped flickering panels for Philips connected LED and put occupancy sensors on every floor.
Signify smart lighting at a glance
Why Signify anchors most Indian smart lighting estates.
- Vendor
- Signify, the company behind Philips professional lighting and the Interact connected lighting platform. It sells across more than 70 countries and leads in office, industrial, retail and outdoor lighting.
- Range
- Philips LED luminaires (panels, downlights, battens, high-bay), Interact Office and Interact Pro software, occupancy and daylight sensors, Philips Dynalite control, UV-C disinfection, Trulifi light-based data, plus emergency and outdoor kits.
- Best fit
- Offices, factories and retail where lighting is a real line on the power bill or a daily annoyance, from a single floor to a plant running three shifts.
- What you save
- Connected LED with occupancy and daylight sensors can cut lighting energy by up to 80% against old conventional fittings, per Signify. The real figure depends on current run hours and how empty the space gets.
- How Sirius Star helps
- We size the fittings, supply the parts, commission the sensors and controls, and stay on the line after go-live. One team on invoices, one team on warranty, one team when you add a floor next year.
- Warranty and support
- OEM-backed Philips and Signify warranty, with a 24 working hours response commitment from our side.
The Signify smart lighting ranges Sirius Star supplies
Pick the range that matches the use case. We size the mix in the free 30-minute review.
Philips LED panels, downlights, battens and high-bay
The fittings themselves, sized for the space. Flat panels and downlights for offices, slim battens for corridors, and high-bay units for warehouses and factory floors. Most are sensor ready, so controls go in now or later without ripping the ceiling out again.
- Sized per space, from a single floor to a full plant
- Sensor ready, so controls can be phased in
- Office, corridor, warehouse and shop-floor options
Interact Office and Interact Pro
The connected lighting software. Interact Pro suits a single office and gets you scheduling and basic control. Interact Office adds energy reporting and space-use data for a whole building, viewed from one dashboard the facilities head can actually read.
- One dashboard for the whole building
- Energy reporting and space-use data
- Start on Interact Pro, grow into Interact Office
Sensors and Philips Dynalite controls
Occupancy and daylight sensors that dim or switch off when a room empties or the sun does the work. Philips Dynalite ties scenes, switches and blinds into one control layer, so the floor runs itself instead of waiting for someone to hit a switch.
- Dim empty rooms automatically
- Daylight harvesting near windows
- Scenes, switches and blinds on one layer
UV-C, Trulifi and emergency kits
Philips UV-C units that disinfect air and surfaces in clinics, labs and food areas, used where the space is empty with the right safety interlocks. Trulifi sends a network link through light for rooms where radio is crowded or restricted. Emergency drivers, car park and facade lighting finish the job.
- UV-C for clinics, labs and food areas
- Trulifi light-based data for radio-restricted rooms
- Emergency, car park and facade lighting
Signify smart lighting vs Premium, Cheapest
All four are honest choices. Most Indian buyers land on the first option for service depth and ecosystem fit.
| Brand | Where it wins | Best fit |
|---|---|---|
| Signify via Sirius Star | One partner sizes, supplies and commissions the lighting and the controls, then owns the warranty and the next-floor add-on. OEM-backed Philips and Signify parts, a 24 working hours response, and honest sizing that cuts the catalogue down to what the building actually needs. | Offices, factories and retail that want the saving without juggling a designer, a contractor and an online seller. |
| Premium MEP or electrical contractor | Good design and solid labour, but you pay a high margin on both and the pace slows once the job spreads across many sites. | Large greenfield builds where the MEP contractor already carries the whole services package. |
| Cheapest unbranded LED online | Lowest sticker price on day one. Nobody owns the output, the controls or the result, and flicker and early failures often show inside two years. | A tiny single-room job where a warranty and real controls do not matter. |
How a Sirius Star Signify procurement runs
Free 30 minute review first. Then a written quote in 24 working hours.
Free lighting and energy review
We walk the floor or read your plans, note current run hours, the spaces that sit empty and the fittings already installed. No charge, about 30 minutes on site.
Size the fittings and controls
We cut the Philips and Interact catalogue down to the parts your building needs, and say plainly where sensors pay back fast and where they do not.
Supply and commission
We deliver the luminaires, wire the drivers, and commission the sensors, Dynalite scenes and Interact dashboard on site so it works from day one.
Support after go-live
One number for warranty, tuning and the next floor. We stay on the line so the saving holds instead of drifting back up.
Buying connected lighting in India: a sizing and savings guide
A short, honest read on where connected LED and sensors pay back, how to phase controls onto fittings you already own, and what to check before you sign.
- Where occupancy and daylight sensors pay back fastest
- How to add Interact controls to existing Philips LED in phases
- What a real lighting and energy review should cover
- Questions to ask before you sign a fit-out
Signify smart lighting India FAQ
Common questions about this brand for Indian buyers. Hover any underlined term for a plain-English definition.
How much can smart lighting actually save?
Signify reports up to 80% lower lighting energy from connected LED with sensors against old conventional fittings. Your real figure depends on how long lights currently stay on and how empty the space gets, so we base the estimate on your run hours rather than a brochure number.
Can I add Interact controls to my existing Philips LED later?
Often yes. Many Philips fittings are sensor ready, so controls can be added in phases. We check what is already installed before we quote, so you only replace what needs replacing.
Do you install and commission smart lighting, or only supply?
Both. Sirius Star sizes the fittings, supplies the parts and commissions the sensors and controls on site. For a bigger fit-out we coordinate the wiring and cabling alongside the lighting so one team owns the result.
Is the occupancy data from smart lighting a privacy risk?
Occupancy sensors count presence and movement so empty spaces dim. They are not cameras and do not identify people. Interact stores space-use and energy data, which we set up with sensible access controls, and our Secure Data Guard practice covers the data and privacy side if your compliance team needs it.
Do you deliver and support smart lighting outside the metros?
Yes. We supply and support smart lighting across India, with delivery to 19,000+ pincodes and a 24 working hours response commitment. Commissioning is scheduled to your site rather than tied to a metro branch.
Not sure whether sensors pay back in your building, or which floors to start with?
That is exactly what a free lighting and energy review answers. Tell us the run hours and the spaces that sit empty, and we size the Philips fittings and Interact controls to your site, say where the saving is real, and where a simpler swap does the job.
Pair this on one PO
What buyers typically add to a Sirius Star order. Each link is a live page on the Sirius Star site.
Related reading from the Sirius Star blog
Long-form context from our team. Each link is a live post on siriusstar.in.